Crystrip

If you are a light designer who ever used LED lights, you could have probably come across various flexible strips assembled with top LED’s. The flexibility of bending makes possible of many designing ideas. However most of these lights require no humid environments.

Technical data Working voltage: 12V DC Current for 5 meters: single color 1.7-2A, RGB 2.6-3A Overall dimensions (length and thickness): single color 13mm X 4mm, RGB 14mm X 4mm Viewing angle: 120° IP rate: IP65 Continuous lighting after 72 hours: less than 40°C   Usage temperature: -40 to 90°C LED q’ty for 5 meters: single color 300pcs, RGB 150 pcs LED type:   single color SMD top LED 3528(1210), RGB SMD top LED 5060

Application Indoor decoration Architectural light Lights for hotel, disco, nightclub, coffee bar, shopping mall, theatre and theme park Lights for cove, archway, stairs, lifts TV show light Lighting for hobbies

Light intensity for each LED warm white 3500K: 750-1100 mcd daylight white 5500-6500K: 750-1100mcd red: 200-610mcd yellow: 170-400mcd blue: 110-250mcd green: 500-700mcd

Light output for 5 meters Warm white 3500K: 530 lumens Daylight white 5500-6500K: 530 lumens Red: 270 lumens Yellow: 270 lumens Blue: 180 lumens Green: 480 lumens RGB: 310 lumens

Ho to order Crystrip

• KESSC-TWF-WW warm white 3500K
• KESSC-TWF-W daylight white 5500K-6600K
• KESSC-TWF-R red
• KESSC-TWF-Y yellow
• KESSC-TWF-B blue
• KESSC-TWF-G green
• KESSC-TWF-RGB RGB

Usage notes

1. The circuit is designed as 3 LEDs in series and the 3-LED units are in parallel. So if a cut is necessary, the cut section won’t be waterproof. Epoxy or another glue needs to be employed to fill in the section and make it waterproof. Otherwise Star-T-LED won’t take the responsibility for the possible damage.
2. Users can cut the strip along the marks on PCB every 3 LEDs. Users need to solder the pads with wires to power supply or to connect another strip. Star-T-LED suggests a preset length of the strip was to be decided before ordering.
3. Crystrip can not be bent to be less than 20 degrees for a long time, in case damage will be done to epoxy.

Please ensure that the circuit is completely disconnected from electrical source before you attempt any installation or replacement of Star-T-LEDs, as this could possibly affect the lifespan of the LED.