Ribbon Lights
Ribbon Lights
P-RIBBON
Descriptions
- The length is 5 meters and width is 8mm, packed in roll.
- Assembled with 390 power 1210 packing SMD LEDs.
- 3M double-sided adhesive tap on PCB back.
- 12VDC @ 78 watts.
- Beam angle 120 degrees.
- Light output 300 lux measured from 10mm distance, 500 lux from 5mm distance.
- Max. 50 degrees celsius in free air.
- Seperable every 3 LEDs along the cutting marks.
- Color available in warm white 3500K and pure white 5500-6500K.
- Weight 0.22KG.
- Standard warranty: 5 years.
|
Application
- Edge-light of sinage, channel letter.
- Home lights: kitchen, bedroom, corridor, furniture.
- Commercial building interior light.
- General lighting for shop, musemn, hospital, theater.
- Decorative lights for pub, disco, club, KTV.
|
Assembly Information
- Solder connection should only be performed on designated solder pads (marked “ +/-”). During soldeing, don’t exceed the maximum soldering time of 10 second s and the maximum soldering temperature of 260 Celsius degrees.
- The smallest unit (3 LEDs) can be removed by cutting with scissors between the designated solder pads.
- The mounting of the ribbon is facilitated by means of the double-sided adhesive on the back-surface of the ribbon. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partide.
- The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the ribbon is appropriately positioned. Press on the ribbon with about 20N/cm2 (refer to application techniques of 3M
adhesive transfer tapes).
- The minimum bending radius is 2 cm. The ribbon may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.
|
Please ensure that the circuit is completely disconnected from electrical source before you attempt any installation or replacement of Star-T-LEDs, as this could possibly affect the lifespan of the LED.
